AT A GLANCE
||Length: 90.5m. Width: 17cm. Thickness: 2.7cm
|Number of hooks
||Cast iron, Victorian-era design hat & coat hooks
||Height: 12cm. Height from plinth: 7.5cm. Spacing: 14.5cm
|| 4 fixing screws and Rawlplugs provided
For Fitting & Care Instructions please click on the tab in the left column
All measurements are approximate
This Gothic-look hat & coat rack is made from recycled pine, rescued from a staircase removed from an old house in Wiltshire. Typical of recycled wood that's spent much of its life being walked on, the surface features a patina of nicks, dents, scrapes and even a smudge of paint, all of which add character and contribute to the antique look of the plinth. The graduated quatrefoil cut-outs take ages to produce but result in a distinct Gothic look. The rich antique finish was achieved with Rustic Pine Briwax, which polishes and stains in one go. This may dull down over time but is easily revived by buffing, and-or beeswax polish, if desired.
Mounted on the plinth is a Victorian-era design hat & coat hook made in cast iron. These are factory dipped in wax to protect the metal, giving the hook a lovely metalic gloss finish.
As with all Hooked on Hooks' coat racks, please email me - Steve Gamblin at email@example.com - for details of smaller or larger versions, or any other requirements.